openwrt下如何重新编译linux内核
本文最后更新于 452 天前,其中的信息可能已经有所发展或是发生改变。 原创文章保留所有权利,允许提前告知征得同意并在明显位置保留原文链接的转载,任何无视版权的行为将受到搜索引擎的 DMCA 投诉。

编译错误

satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-tcp-bbr:
kernel (= 4.9.138-1-15628fc9e383336aab61c9d56be1260b) *
opkg_install_cmd: Cannot install package kmod-tcp-bbr.
satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-usb-core:
kernel (= 4.9.138-1-15628fc9e383336aab61c9d56be1260b) *
opkg_install_cmd: Cannot install package kmod-usb-core.
satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-usb-hid:
kernel (= 4.9.138-1-15628fc9e383336aab61c9d56be1260b) *
opkg_install_cmd: Cannot install package kmod-usb-hid.
package/Makefile:65: recipe for target 'package/install' failed
make[2]: *** [package/install] Error 255

查找错误解决方法

[gt href=’https://github.com/coolsnowwolf/lede/issues/872′]Github[/gt]

重新编译内核

make target/linux/install V=s

清空内核

make target/linux/clean V=s

解压内核

make target/linux/prepare V=s

半亩方塘 , 版权所有丨如未注明 , 均为原创丨本网站采用CC BY-NC-SA 3.0 CN反996许可证协议进行授权
转载请注明原文链接:openwrt下如何重新编译linux内核
上一篇
下一篇